Materials Quality Assurance Procedures Manual - Revision history

SchaeferS: /* 2020 Summary of Revision to the MQAP */ removed BOBS SFQM information to create new section per Matt Filcek/Dennis Warren

2020-08-03T11:36:50Z

2020 Summary of Revision to the MQAP: removed BOBS SFQM information to create new section per Matt Filcek/Dennis Warren

SchaeferS: /* 2020 Summary of Revision to the MQAP */ Added BOBS Structural Fabrication Quality Manual information to the 2020 section per Matt Filcek

2020-07-30T21:20:22Z

2020 Summary of Revision to the MQAP: Added BOBS Structural Fabrication Quality Manual information to the 2020 section per Matt Filcek

SchaeferS: /* 2020 Summary of Revision to the MQAP */ corrected typo

2020-07-22T14:18:55Z

2020 Summary of Revision to the MQAP: corrected typo

SchaeferS: Added 2020 Summary of Revisions to the MQAP

2020-07-22T14:07:01Z

Added 2020 Summary of Revisions to the MQAP

Clarkj25 at 17:48, 11 June 2020

2020-06-11T17:48:30Z

SchaeferS: /* 2019 Summary of Revisions to the MQAP */ Fix odd line breaks

2019-09-26T18:55:13Z

2019 Summary of Revisions to the MQAP: Fix odd line breaks

SchaeferS: Added/updated 2019 Material Quality Assurance Procedures Manual

2019-09-26T18:52:48Z

Added/updated 2019 Material Quality Assurance Procedures Manual

McGowanR: /* 2016 Summary of Revisions to the MQAP */ Fixed Broken Links to 2016 MQAP Manual

2019-02-21T18:34:04Z

2016 Summary of Revisions to the MQAP: Fixed Broken Links to 2016 MQAP Manual

McGowanR: /* 2017 Summary of Revisions to the MQAP */ Fixed Broken Links to 2017 MQAP Manual

2019-02-21T18:18:41Z

2017 Summary of Revisions to the MQAP: Fixed Broken Links to 2017 MQAP Manual

McGowanR: /* 2018 Summary of Revisions to the MQAP */ Fixed broken links for sections of 2018 MQAP Manual

2019-02-21T17:37:09Z

2018 Summary of Revisions to the MQAP: Fixed broken links for sections of 2018 MQAP Manual

← Older revision		Revision as of 11:36, 3 August 2020
Line 13:		Line 13:

	Table of Contents Content deleted from the manual has resulted in subsequent chapters in the manual being re-indexed. The Table of Contents has been updated to reflect the changes.		Table of Contents Content deleted from the manual has resulted in subsequent chapters in the manual being re-indexed. The Table of Contents has been updated to reflect the changes.
−
−	The Bureau of Bridges and Structures Construction Section has developed a Structural Fabrication Quality Manual. The manual is referenced in the MDOT Materials Quality Assurance Procedures Manual and is located on the [https://www.michigan.gov/mdot/0,4616,7-151-87728_87844_87846_91594---,00.html Structural Fabrication Unit’s (SFU)] website. A brief description of the manual is presented below.
−
−	<b>Chapter 1 (General Information):</b> Existing [https://www.michigan.gov/documents/mdot/MDOT_QA_Guidance_Document_653754_7.pdf MDOT Structural Fabrication Quality Assurance Guidance Document] is rolled into this manual with the addition of a narrative report writing section.
−
−	~~<b>Chapter 2 (Fabrication Inspection Procedures):</b> Existing fabrication inspection procedures from MQAP Manual with the following general revisions:~~
−	~~:*Formatting update;~~
−	~~:*Revised original MQAP numbering system;~~
−	~~:*Updates to reflect current naming convention;~~
−	~~:*Revised reference documents;~~
−	~~:*Added referenced to ITPs;~~
−	~~:*Revised procedures to accurately reflect actual processes; and~~
−	~~:*Revised reporting section.~~
−
−	<b>Chapter 3 (Inspection and Test Plans):</b> A developed Inspection and Test Plans (ITP) supplement the fabrication inspection procedures shown in Chapter 2 by providing more detailed step by step inspection and test requirements, activity type, and option for reduced inspection (Level II) for less critical products. The following standard ITPs were developed:
−	~~:*Non-Prestressed Concrete: Level I~~
−	~~:*Non-Prestressed Concrete: Level II~~
−	~~:*Prestressed Concrete: Level I~~
−	~~:*Prestressed Concrete: Level II~~
−	~~:*Structural Steel: Level I~~
−	~~:*Structural Steel: Level II~~
−
−	<b>Chapter 4 (Supplier Qualification Program):</b> Existing Supplier Qualification Program for Prestressed Beams is in this chapter. This program was reviewed by industry last fall, approved by BOBS management, and becomes effective for the October 2020 letting. This chapter provides a natural home for the Structural Fabrication Unit’s’ prestressed beam supplier qualification program and offers room for growth.
−
−	<b>Chapter 5 (Approved Supplier List):</b> This chapter contains MDOT’s Approved Supplier List (ASL). Suppliers must successfully demonstrate compliance to the related MDOT Supplier Qualification Standard to be eligible. See
−	Chapter 4 for more information about MDOT’s supplier qualification programs. MDOT’s ASL can be accessed by clicking the related hyperlink in this chapter or found on [https://www.michigan.gov/mdot/0,4616,7-151-87728_87844_87846_91594---,00.html MDOT’s SFU] website.

	<b><u>Manual Section</u></b>		<b><u>Manual Section</u></b>

← Older revision		Revision as of 21:20, 30 July 2020
Line 13:		Line 13:

	Table of Contents Content deleted from the manual has resulted in subsequent chapters in the manual being re-indexed. The Table of Contents has been updated to reflect the changes.		Table of Contents Content deleted from the manual has resulted in subsequent chapters in the manual being re-indexed. The Table of Contents has been updated to reflect the changes.
		+
		+	The Bureau of Bridges and Structures Construction Section has developed a Structural Fabrication Quality Manual. The manual is referenced in the MDOT Materials Quality Assurance Procedures Manual and is located on the [https://www.michigan.gov/mdot/0,4616,7-151-87728_87844_87846_91594---,00.html Structural Fabrication Unit’s (SFU)] website. A brief description of the manual is presented below.
		+
		+	<b>Chapter 1 (General Information):</b> Existing [https://www.michigan.gov/documents/mdot/MDOT_QA_Guidance_Document_653754_7.pdf MDOT Structural Fabrication Quality Assurance Guidance Document] is rolled into this manual with the addition of a narrative report writing section.
		+
		+	<b>Chapter 2 (Fabrication Inspection Procedures):</b> Existing fabrication inspection procedures from MQAP Manual with the following general revisions:
		+	:*Formatting update;
		+	:*Revised original MQAP numbering system;
		+	:*Updates to reflect current naming convention;
		+	:*Revised reference documents;
		+	:*Added referenced to ITPs;
		+	:*Revised procedures to accurately reflect actual processes; and
		+	:*Revised reporting section.
		+
		+	<b>Chapter 3 (Inspection and Test Plans):</b> A developed Inspection and Test Plans (ITP) supplement the fabrication inspection procedures shown in Chapter 2 by providing more detailed step by step inspection and test requirements, activity type, and option for reduced inspection (Level II) for less critical products. The following standard ITPs were developed:
		+	:*Non-Prestressed Concrete: Level I
		+	:*Non-Prestressed Concrete: Level II
		+	:*Prestressed Concrete: Level I
		+	:*Prestressed Concrete: Level II
		+	:*Structural Steel: Level I
		+	:*Structural Steel: Level II
		+
		+	<b>Chapter 4 (Supplier Qualification Program):</b> Existing Supplier Qualification Program for Prestressed Beams is in this chapter. This program was reviewed by industry last fall, approved by BOBS management, and becomes effective for the October 2020 letting. This chapter provides a natural home for the Structural Fabrication Unit’s’ prestressed beam supplier qualification program and offers room for growth.
		+
		+	<b>Chapter 5 (Approved Supplier List):</b> This chapter contains MDOT’s Approved Supplier List (ASL). Suppliers must successfully demonstrate compliance to the related MDOT Supplier Qualification Standard to be eligible. See
		+	Chapter 4 for more information about MDOT’s supplier qualification programs. MDOT’s ASL can be accessed by clicking the related hyperlink in this chapter or found on [https://www.michigan.gov/mdot/0,4616,7-151-87728_87844_87846_91594---,00.html MDOT’s SFU] website.

	<b><u>Manual Section</u></b>		<b><u>Manual Section</u></b>

@@ Line 62: / Line 62: @@
 ! Specification Reference !! Material Name !! Basis of Acceptance !! Change Made and Reason for Change
 |-
-| 052.02B || Overband Crackfill || VI & See Remark || Removed Asphalt Rubber and Alt 1 from Material Name per Materials Technology Unit.
+| 502.02B || Overband Crackfill || VI & See Remark || Removed Asphalt Rubber and Alt 1 from Material Name per Materials Technology Unit.
 |-
 | 708.01 || Structural Prestressed Concrete Construction || Fabrication Inspection || Revised Spec No. and Material Name., revised Remarks to reference the new Structural Fabrication Quality Manual and Special Instructions, removed reference to the MQAP per the Structural Fabrication Unit.
@@ Line 96: / Line 96: @@
 | 919.07 || Cantilever Sign Supports || Fabrication Inspection || Revised Remarks to reference the new Structural Fabrication Quality Manual, removed reference to the MQAP per the Structural Fabrication Unit.
 |-
-| 989.08 || Truss Sign Supports || Fabrication Inspection || Revised Remarks to reference the new Structural Fabrication Quality Manual, removed reference to the MQAP per the Structural Fabrication Unit.
+| 919.08 || Truss Sign Supports || Fabrication Inspection || Revised Remarks to reference the new Structural Fabrication Quality Manual, removed reference to the MQAP per the Structural Fabrication Unit.
 |-
 |}
@@ Line 118: / Line 118: @@
 {{top}}
 =[[#2019 Summary of Revisions to the MQAP|2019 Summary of Revisions to the MQAP]]=

@@ Line 9: / Line 9: @@
 =[[#2019 Summary of Revisions to the MQAP|2019 Summary of Revisions to the MQAP]]=
@@ Line 95: / Line 203: @@
 .07	Revised instructions to describe the field inspections to be performed and to give information pertaining to reference materials available for the inspections published in the Construction Manual.
 =[[#2018 Summary of Revisions to the MQAP|2018 Summary of Revisions to the MQAP]]=
@@ Line 158: / Line 267: @@
 .06 Revised instructions to remove redundant information.  Revised instructions for perforated pipe to indicate that tested stock is not permitted for clarification.
 =[[#2017 Summary of Revisions to the MQAP|2017 Summary of Revisions to the MQAP]]=
@@ Line 224: / Line 334: @@
 .07	Added reference to the Materials Quality Assurance Procedures Manual, Chapter 4.07 (Load Transfer Assemblies for Transverse Joints), which documents the field inspection of these materials.
 =[[#2016 Summary of Revisions to the MQAP|2016 Summary of Revisions to the MQAP]]=

← Older revision		Revision as of 17:48, 11 June 2020
Line 2:		Line 2:
	<div style="text-align: center;">[mailto:Change?body=http://mdotwiki.state.mi.us/construction/index.php/Materials_Quality_Assurance_Procedures_Manual Email this Page]</div>		<div style="text-align: center;">[mailto:Change?body=http://mdotwiki.state.mi.us/construction/index.php/Materials_Quality_Assurance_Procedures_Manual Email this Page]</div>

−	Materials Quality Assurance (QA) sampling and testing procedures described in this manual have been developed by Michigan Department of Transportation (MDOT) in accordance with Title 23, of The Code of Federal Regulations, Part 637. Objectives of the program include the design and implementation of sampling and testing procedures to assure that materials are in reasonably close conformity with plans and specifications. The Materials QA program includes acceptance sampling and testing, independent assurance testing, project materials certification, retention of sampling and testing records, verification of test procedures, calibration of testing apparatus and participation in the development and implementation of technical training for personnel involved in materials sampling and testing.	+	Materials Quality Assurance (QA) sampling and testing procedures described in this manual have been developed by Michigan Department of Transportation (MDOT) in accordance with [https://ecfr.io/Title-23/sp23.1.637.b Title 23, of The Code of Federal Regulations, Part 637]. Objectives of the program include the design and implementation of sampling and testing procedures to assure that materials are in reasonably close conformity with plans and specifications. The Materials QA program includes acceptance sampling and testing, independent assurance testing, project materials certification, retention of sampling and testing records, verification of test procedures, calibration of testing apparatus and participation in the development and implementation of technical training for personnel involved in materials sampling and testing.

@@ Line 47: / Line 47: @@
-References to the corresponding MQAP Section in the table have been updated to reflect changes in the indexing.
+References to the corresponding MQAP Section in the table have been updated to reflect changes in the indexing.	<br />
-<u>Materials  Acceptance Requirements Table Revisions</u>
+'''<u>Materials  Acceptance Requirements Table Revisions</u>'''
 {| class="wikitable"

@@ Line 3: / Line 3: @@
 Materials Quality Assurance (QA) sampling and testing procedures described in this manual have been developed by Michigan Department of Transportation (MDOT) in accordance with Title 23, of The Code of Federal Regulations, Part 637.  Objectives of the program include the design and implementation of sampling and testing procedures to assure that materials are in reasonably close conformity with plans and specifications.  The Materials QA program includes acceptance sampling and testing, independent assurance testing, project materials certification, retention of sampling and testing records, verification of test procedures, calibration of testing apparatus and participation in the development and implementation of technical training for personnel involved in materials sampling and testing.
 The Materials Quality Assurance Procedures Manual is found at the following link:
 http://www.michigan.gov/mdot/0,4616,7-151-9622_11044_11367-207980--,00.html
 =[[#2018 Summary of Revisions to the MQAP|2018 Summary of Revisions to the MQAP]]=

@@ Line 142: / Line 142: @@
 '''<u>Manual Section</u>'''
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=20 1.08]    Revised this chapter to include methods of tagging samples.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=20 1.08]    Revised this chapter to include methods of tagging samples.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=40 3.01]    Revised the Certification Documentation requirements.  Eliminated the quantity requirement, clarified that the material can be certified by the contractor, and included language to clarify the general certification requirements of QPL products.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=40 3.01]    Revised the Certification Documentation requirements.  Eliminated the quantity requirement, clarified that the material can be certified by the contractor, and included language to clarify the general certification requirements of QPL products.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=67 3.07]    Revised this chapter to include slag cement.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=67 3.07]    Revised this chapter to include slag cement.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=69 3.08]    Revised this chapter to include submittal requirements for qualifying new facilities.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=69 3.08]    Revised this chapter to include submittal requirements for qualifying new facilities.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=72 3.09]    Deleted chapter 3.09 Temporary Concrete Barrier in its entirety and replaced it with Concrete Pipe, Culvert, and Related Items, previously chapter 3.10.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=72 3.09]    Deleted chapter 3.09 Temporary Concrete Barrier in its entirety and replaced it with Concrete Pipe, Culvert, and Related Items, previously chapter 3.10.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=72 3.10]    Revised this chapter to remove the fabrication inspection and acceptance of culverts, revised to chapter 3.09.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=72 3.10]    Revised this chapter to remove the fabrication inspection and acceptance of culverts, revised to chapter 3.09.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=83 4.04]    Significant revisions to this chapter have occurred.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=83 4.04]    Significant revisions to this chapter have occurred.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=94 4.05]    Significant revisions to this chapter have occurred.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=94 4.05]    Significant revisions to this chapter have occurred.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=108 4.06]	Significant revisions to this chapter have occurred.  Combined chapter 4.10 (Tower Lighting Unit Fabrication) and 4.11 (Traffic Signal Mast Arm Pole and Mast Arm) into this chapter.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=108 4.06]	Significant revisions to this chapter have occurred.  Combined chapter 4.10 (Tower Lighting Unit Fabrication) and 4.11 (Traffic Signal Mast Arm Pole and Mast Arm) into this chapter.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=125 4.10]	Replaced with new chapter Temporary Traffic Control Certification and Acceptance Procedure.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=125 4.10]	Replaced with new chapter Temporary Traffic Control Certification and Acceptance Procedure.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=128 4.11]Replaced with new chapter Non-Prestressed Structural Precast Concrete Fabrication.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=128 4.11]Replaced with new chapter Non-Prestressed Structural Precast Concrete Fabrication.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=139 4.13]Significant revisions to this chapter have occurred.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=139 4.13]Significant revisions to this chapter have occurred.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=222 6.17]	Revised the submittal procedure and yearly update procedure for the qualification of admixtures for concrete.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=223 6.17]	Revised the submittal procedure and yearly update procedure for the qualification of admixtures for concrete.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=274 6.39]	Revised procedure to allow for the qualification of black colored temporary pavement marking materials.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=274 6.39]	Revised procedure to allow for the qualification of black colored temporary pavement marking materials.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=276 7.01]	See the following table for major revisions made to the Materials Acceptance Requirements Table.
+[http://www.michigan.gov/documents/mdot/MDOT_2016_MQAPFinal_633310_7.pdf#page=276 7.01]	See the following table for major revisions made to the Materials Acceptance Requirements Table.
 '''<u>Materials Acceptance Requirements Table Major Revisions</u>'''

@@ Line 76: / Line 76: @@
 '''<u>Manual Section</u>'''
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=10 1.02] Significant revisions to this chapter have occurred.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=10 1.02] Significant revisions to this chapter have occurred.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=46 3.03] Removed “902.01 Aggregates - See Section 3.04.08 of this manual.” from the Schedule No. 2 Special Instructions.  Removed “904.03C Emulsified Asphalt - See Section 3.06.06 of this manual.” from the Schedule No. 2 Special Instructions as this process is not applicable to the Region Materials staff.  Added Operations Field Services sampling responsibilities for Pre-stressing Strand to the Schedule II Certification Verification Special Instructions.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=46 3.03] Removed “902.01 Aggregates - See Section 3.04.08 of this manual.” from the Schedule No. 2 Special Instructions.  Removed “904.03C Emulsified Asphalt - See Section 3.06.06 of this manual.” from the Schedule No. 2 Special Instructions as this process is not applicable to the Region Materials staff.  Added Operations Field Services sampling responsibilities for Pre-stressing Strand to the Schedule II Certification Verification Special Instructions.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=83 4.04] Added Section 4.04.06 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=72 4.04] Added Section 4.04.06 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=94 4.05] Added Section 4.05.07 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=83 4.05] Added Section 4.05.07 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=108 4.06]Added Section 4.06.06 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=107 4.06]Added Section 4.06.06 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=120 4.07]	Revised this chapter to redefine the fabrication inspection of Load Transfer Assemblies for Transverse Joints.  Frequency of inspections was changed, allowable Visual Inspection limits were modified and the method of documentation of these inspections was revised.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=109 4.07]	Revised this chapter to redefine the fabrication inspection of Load Transfer Assemblies for Transverse Joints.  Frequency of inspections was changed, allowable Visual Inspection limits were modified and the method of documentation of these inspections was revised.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=128 4.11]Added Section 4.11.06 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=117 4.11]Added Section 4.11.06 to define Stockpile Payment procedures when requested of and implemented by the Structural Fabrication Unit.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=188 6.04]Revised the submittal process for the qualified products evaluation procedure of Non-Shrinking Mortar and Grout, Premixed, Type H-1 (Non-Metallic).  Revised physical requirements reporting.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=177 6.04]Revised the submittal process for the qualified products evaluation procedure of Non-Shrinking Mortar and Grout, Premixed, Type H-1 (Non-Metallic).  Revised physical requirements reporting.
-[http://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=276 7.01]See the following table for major revisions made to the Materials Acceptance Requirements Table.
+[http://www.michigan.gov/documents/mdot/MDOT_2017_MQAP_Final_633294_7.pdf#page=265 7.01]See the following table for major revisions made to the Materials Acceptance Requirements Table.
 Aggregate sampling frequencies have been revised for all specified aggregate types presented in the table to cross reference to the Procedures for Aggregate Inspection Manual.

@@ Line 13: / Line 13: @@
 '''<u>Manual Section</u>'''
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=14 1.05] Removed this chapter as the content for random sampling by the cube root method is no longer used.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=14 1.05] Removed this chapter as the content for random sampling by the cube root method is no longer used.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=14 1.05] Renumbered Section 1.06 to 1.05.  Removed Section 1.05.06 of this chapter as it is covered by other contract documents.  Removed concrete coring information as it is covered by other contract documents.  Removed the details pertaining to relocation of a core in relation to transverse direction and proximity to the edge of pavement.  This direction is defined in other contract documents.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=14 1.05] Renumbered Section 1.06 to 1.05.  Removed Section 1.05.06 of this chapter as it is covered by other contract documents.  Removed concrete coring information as it is covered by other contract documents.  Removed the details pertaining to relocation of a core in relation to transverse direction and proximity to the edge of pavement.  This direction is defined in other contract documents.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=20 1.08] Renumbered Section 1.09 to 1.08.  Removed section 1.08.03.E that documented the testing requirements for warehouse items.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=20 1.08] Renumbered Section 1.09 to 1.08.  Removed section 1.08.03.E that documented the testing requirements for warehouse items.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=37 3.01] Removed the requirement for qualified product listed materials to be documented via a general certification.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=37 3.01] Removed the requirement for qualified product listed materials to be documented via a general certification.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=58 3.08] Added requirements for third party certification for qualification of new plants.  Revised section 3.08.12 to include annual requirements for plant certifications.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=58 3.08] Added requirements for third party certification for qualification of new plants.  Revised section 3.08.12 to include annual requirements for plant certifications.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=69 4.04] Added requirements for submittal and processing of the Materials Source List (form 501).
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=69 4.04] Added requirements for submittal and processing of the Materials Source List (form 501).
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=105 4.07] Added reference to the Load Transfer Assembly Inspection Report (form 0553).
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=105 4.07] Added reference to the Load Transfer Assembly Inspection Report (form 0553).
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=113 4.11] Added requirements for submittal and processing of the Materials Source List (form 501).
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=113 4.11] Added requirements for submittal and processing of the Materials Source List (form 501).
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=122 4.12] Numerous revisions to this chapter.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=122 4.12] Numerous revisions to this chapter.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=184 6.06] Revised the qualification procedure to include new specifications for penetrating water repellent treatment for concrete surfaces.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=184 6.06] Revised the qualification procedure to include new specifications for penetrating water repellent treatment for concrete surfaces.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=224 6.23] Replaced the Class B Bury qualification procedure with the Class A, B and F Bury qualification procedure.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=224 6.23] Replaced the Class B Bury qualification procedure with the Class A, B and F Bury qualification procedure.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=259 6.38] Added new qualification procedure for the evaluation of wet reflective beads and elements per 920.02.C.  Subsequent qualification procedures were re-indexed to reflect the entry of this new procedure.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=259 6.38] Added new qualification procedure for the evaluation of wet reflective beads and elements per 920.02.C.  Subsequent qualification procedures were re-indexed to reflect the entry of this new procedure.
-[https://www.michigan.gov/documents/mdot/MDOT_2014_MQAPFinalLinked_453616_7.pdf#page=265 7.01] See the following table for major revisions made to the Materials Acceptance Requirements Table.
+[https://www.michigan.gov/documents/mdot/MDOT_2018_MQAP_Final_Linked_633525_7.pdf#page=265 7.01] See the following table for major revisions made to the Materials Acceptance Requirements Table.
 Aggregate sampling frequencies have been revised for all specified aggregate types presented in the table to cross reference to the Procedures for Aggregate Inspection Manual.